12000L Asphalt Distributor is used for spraying asphalt on the prime coat, the water-proof layer
and tack coat in high-graded road construction. It also can be used for bituminous pavement with the construction
techniques of spreading in layers. It can spray hot asphalt, emulsified asphalt, modified asphalt, etc. It is mainly
composed of Truck Chassis, Asphalt Tank, Asphalt Pumping and Spraying System, Heating System, Hydraulic
Circuit, Pneumatic Circuit, Auto control System and Operation Panel.
Main performance
1. Each spraying nozzle can be controlled independently to decide the spraying width within the range of 6 meters.
2. Spraying of asphalt is very even, and can realize to spray in three-overlapping.
3. Asphalt application rate is controlled by computer and independent of truck speed.
4. Thermal oil preserves heat of asphalt pump and spraying nozzles, donot need to be washed by diesel oil after finishing spraying. It uses high-pressure air to drain the pipe and spraying nozzle or make use of thermal oil’s cycle to ensure pipelines and spraying nozzles not to be blocked.
5. Control System is in modular design, which is very convenient to be maintained and easy for troubleshooting.
6. Can ensure machine to work normally when Main Control System failure.
7.It is equipped with flexible hand-spraying system.
8.Temeprature fall for each hour is less than 1 ℃.
Main Technical Specification
No |
Parameters |
Unit |
Standard Value |
1 |
Asphalt Tank Capacity |
L |
12000 |
2 |
Spraying Width |
mm |
0-6000 |
3 |
Asphalt Application Rate |
kg/m2 |
0.3~3 |
4 |
Spraying Precision |
% |
2 |
5 |
Asphalt Heating Mode |
heat with thermal oil |
|
6 |
Diesel burner heat capacity |
kcal/h |
18×104 |
7 |
Average Temp. Fall |
℃/h |
≤1 |
8 |
Total Mass |
kg |
25000 |
9 |
Overall Dimensions |
mm |
10530×2500×3400 |